How it's calculated
Thickness = target R-value ÷ R-value per inch
Bags or rolls = area ÷ coverage per bag at your R-value
R-values per inch are typical; check the product. For blown insulation, use the coverage chart on the bag, which lists square feet per bag for each R-value and accounts for settling.
Example
Reaching R-49 in a 1,000 sq ft attic with fiberglass batts at R-3.2 per inch needs about 15 inches. If a bundle covers 40 sq ft at that R-value, you'd need 25.
Tips
- Recommended R-values depend on your climate and the part of the house; the US Department of Energy has insulation guidance by climate zone.
- Air-seal gaps before adding insulation, and keep vents and recessed lights clear unless they're rated for contact.
- Estimate heating needs with the BTU calculator.
Frequently asked questions
How thick is R-38 insulation?
About 12 inches of fiberglass batts, or 15 inches of blown fiberglass.
Does compressing insulation lower R-value?
Yes; batts compressed into a smaller space lose some R-value.
Can I add insulation on top of old insulation?
Usually yes, if the old insulation is dry and there's no mould or pest damage.
Written and checked by Vijay. Last updated .