L-network formulas
Q = √(Rhigh ÷ Rlow − 1)
Series reactance Xs = Q × Rlow
Shunt reactance Xp = Rhigh ÷ Q
L = X ÷ 2πf, C = 1 ÷ (2πf × X)
The shunt element goes across the higher resistance and the series element in line with the lower one. The low-pass version also filters harmonics.
Transformer matching
Turns ratio = √(Zprimary ÷ Zsecondary)
Impedance transforms by the square of the turns ratio, so matching an 8,000 Ω valve amplifier output to an 8 Ω speaker needs about a 31.6 : 1 transformer.
Tips
- This matches purely resistive impedances; cancel any reactance in the load first.
- For basic circuit values, use the Ohm's law calculator and power factor calculator.
Frequently asked questions
Why match impedance?
Matching the load to the source gives maximum power transfer and minimises reflections in RF lines.
What is an L-network?
A two-component matching circuit, one in series and one in parallel, that matches two resistances at one frequency.
Can an L-network match equal resistances?
No network is needed if they're already equal.
Written and checked by Vijay. Last updated .