Home › Construction & Home › Rebar Calculator

Rebar Calculator

This rebar calculator estimates the reinforcing bar needed for a slab laid out in a grid. Enter the slab size, bar spacing and the clearance from the edges.

How the grid is counted

Bars one way = (slab width − 2 × clearance) ÷ spacing + 1 (rounded down before adding 1)
Length of each bar = slab length − 2 × clearance
Repeat for the other direction, then add laps and waste

Bar weights: #3 = 0.376 lb/ft, #4 = 0.668 lb/ft, #5 = 1.043 lb/ft.

Example

A 20 × 20 ft slab with bars every 12 inches and 3 inches of edge clearance needs 20 bars each way, each 19.5 ft long: 780 ft in total (about 521 lb of #4). With 10% extra, buy 43 sticks of 20 ft.

Tips

  • Bars are usually lapped (overlapped) at joins by a set number of bar diameters; your plans or local code set this.
  • Support rebar on chairs so it sits in the middle of the slab, not on the ground.
  • Work out the concrete with the concrete calculator.

Frequently asked questions

What spacing should rebar be in a slab?

12 to 18 inches on centre is common for residential slabs; follow your plans or engineer.

How heavy is a 20 ft #4 bar?

About 13.4 lb.

Do driveways need rebar?

Many use rebar or wire mesh; it depends on soil, loads and local practice.

Written and checked by Vijay. Last updated .