How it's calculated
Concrete = (hole area − post area) × (hole depth − gravel depth) × number of posts
Hole area = π × diameter² ÷ 4. Bag yields are typical for standard concrete mix: about 0.60 cu ft for 80 lb, 0.45 for 60 lb, 0.375 for 50 lb and 0.30 for 40 lb bags.
Example
A 10-inch hole 36 inches deep with 6 inches of gravel and a 4×4 post needs (78.5 − 12.25) × 30 = 1,989 cubic inches, about 1.15 cu ft: two 80 lb bags or four 50 lb bags.
Tips
- A common rule is a hole three times the post width and one-third to one-half of the post's above-ground height deep; go below the frost line where the ground freezes.
- Buy a spare bag; holes are rarely perfect cylinders.
- For slabs and footings, use the concrete calculator or sonotube calculator; for the fence itself, the fence calculator.
Frequently asked questions
How many bags of concrete per fence post?
Often 2 bags of 80 lb (or 3–4 of 50 lb) for a 4×4 in a 10-inch hole 3 ft deep.
Should I put gravel under the post?
A few inches of gravel helps drainage and reduces rot.
Does fast-setting concrete yield the same?
Similar, but check the bag; yields vary by product.
Written and checked by Vijay. Last updated .