Conversion
inches = mm ÷ 25.4
mm = inches × 25.4
Only a few metric and SAE sizes are close enough to swap safely: 19 mm and ¾" are within 0.05 mm. Others, like 13 mm and ½" (12.7 mm), are close but loose enough to round off a tight bolt.
Metric to SAE wrench chart
| Metric | In inches | Nearest SAE | Difference |
|---|---|---|---|
| 6 mm | 0.236" | 1/4" | +0.35 mm |
| 7 mm | 0.276" | 1/4" | -0.65 mm |
| 8 mm | 0.315" | 5/16" | -0.06 mm |
| 10 mm | 0.394" | 3/8" | -0.48 mm |
| 11 mm | 0.433" | 7/16" | +0.11 mm |
| 12 mm | 0.472" | 1/2" | +0.70 mm |
| 13 mm | 0.512" | 1/2" | -0.30 mm |
| 14 mm | 0.551" | 9/16" | +0.29 mm |
| 15 mm | 0.591" | 9/16" | -0.71 mm |
| 16 mm | 0.630" | 5/8" | -0.12 mm |
| 17 mm | 0.669" | 11/16" | +0.46 mm |
| 18 mm | 0.709" | 11/16" | -0.54 mm |
| 19 mm | 0.748" | 3/4" | +0.05 mm |
| 21 mm | 0.827" | 13/16" | -0.36 mm |
| 22 mm | 0.866" | 7/8" | +0.22 mm |
| 24 mm | 0.945" | 15/16" | -0.19 mm |
Tips
- Use the correct system whenever you can; a loose wrench damages bolt heads.
- For general lengths, see the mm to inches converter; for torque, the Nm to ft-lb converter.
Frequently asked questions
What SAE size is 10 mm?
There isn't a good match: 3/8" (9.53 mm) is too small and 13/32" (10.32 mm) is loose, so use a 10 mm wrench.
Is 19 mm the same as 3/4 inch?
Almost: 3/4" is 19.05 mm, so they're usually interchangeable.
What does SAE mean?
Society of Automotive Engineers: here it means inch-based tool sizes.
Written and checked by Vijay. Last updated .